Molybdenum Sheets & Plates
Application | Type | Machin-ability | Discharge-ability | Discharge Consumption Resistance | Wear Resistance | Corrosion Resistance (VM) | |
MOP | Heatspreaders, Boats for Evaporation, Electron Tubes, Furnace Parts, Crucibles, | Standard Products | △ | ⃝ | ⃝ | ⃝ | ◎ |
Deep Drawing Materials, Boats for Evaporation | Cross-rolled Products | △ | ⃝ | ◎ | ◎ | ◎ | |
TEM | Reflectors | Standard Products | ⃝ | ◎ | ⃝ | ⃝ | ⃝ |
DMB | Base Plates for Sintering Boats, Base Plates for Fusing Prevention, Setters, Boats |
Honed Surface, or Coated Surface |
◎ | △ | △ | △ | ⃝ |
TEM-B | ◎ | ⃝ | ◎ | ⃝ | △ | ||
TEM | ⃝ | ◎ | ⃝ | △ | ⃝ |
◎Most suitable ⃝Suitable △Unsuitable
MOP
- MOP is the most common pure molybdenum sheet/plate. It features a high melting point, high strength at high temperatures, high thermal conductivity, low coefficient of thermal expansion and excellent machinability.
TEM
- Molybdenum sheet/plate that has considerably solved the weak points of conventional molybdenum such as recrystallization brittleness and creep (deformation) resistance at high temperatures.
TEM-B
- TEM-B excels in high-temperature deformation resistance and shock resistance at room temperature and also allows plastic working at room temperature. It also features higher high-temperature strength than pure molybdenum.
DMB
- DMB features excellent creep (deformation) resistance at high temperatures, a low coefficient of thermal expansion and excellent characteristics in vacuum or reduction atmosphere.
Standard specifications of molybdenum sheets & plates
Thickness |
Material | Finished surface | Dimensions | |||
MOP | TEM | Mirror | Chemically cleaned | Max. width | Max. length | |
0.015~0.099 | ⃝ | ⃝ | 110 | 500 | ||
0.10~0.15 | ⃝ | ⃝ | 300 | 1000 | ||
0.16~0.19 | ⃝ | ⃝ | ⃝ | 300 | 1500 | |
0.20~2.9 | ⃝ | ⃝ | ⃝ | ⃝ | 600 | 2000 |
3.0~25.0 | ⃝ | ⃝ | ⃝ | 600 | 1000 |
Thickness General Tolerance ±10% (mm) |
Material | Finished surface | Dimensions | ||||
DMB | TEM-B | Mirror | Chemically cleaned | Honed surface | Max. width | Max. length | |
0.50~1.4 | ⃝ | ⃝ | ⃝ | ⃝ | 300 | 600 | |
1.5~2.9 | ⃝ | ⃝ | ⃝ | ⃝ | ⃝ | 500 | 600 |
3.0~6.9 | ⃝ | ⃝ | ⃝ | ⃝ | 600 | 600 | |
7.0~14.9 | ⃝ | ⃝ | ⃝ | 600 | 600 |
◎Most suitable ⃝Suitable △Unsuitable
Standard specifications of cross-rolled molybdenum sheets & plates
Thickness |
Material | Finished Surface | Dimensions | |
MOP | Mirror | Max. width | Max. length | |
0.10~1.00 | ⃝ | ⃝ | 300 | 1000 |
※Consult with us for dimensions other than the above.
High-temperature deformation resistance of various kinds of molybdenum sheets & plates

High-temperature strength of various kinds of molybdenum sheets & plates after use at high temperature (1800℃)
